Operating instructions

41
Procedure for use
Washing
Turn the dial on the card programmer control
panel to the 0 (STOP) position. Insert a
programmed card, with the pegs upwards, into
the opening below the control. Push the program
card in as far as it will go.
Press 1-0 (ON/OFF), push-button switch.
Start the machine by turning the dial on the
programmer control panel to the I (START)
position.
The water level can be raised while the program
is in progress by using the push-buttons for
water. Additional detergent from compartment 1
can be flushed down by pressing the
FLUSHDOWN push-button.
63
64
65
62
0658
0659
0660
0661
Fig.
62
Fig.
63
Fig.
64
Fig.
65