Operating instructions

38
Rinse cycle 1-3
These three rinse cycles are identical.
Time: 4 minutes and 30 seconds (steps 26-34, 35-43, 44-52).
Each rinse cycle comprises three phases:
1 Filling with water and rinsing (steps 26-31, 35-40, 44-49).
Filling with cold water (rib O) to high water level (rib N).
2 Draining (steps 32-34. 41-43, 50-52)
The drain valve opens (rib K).
3 Spin (steps 33-34, 42-43, 51-52).
Spin (rib H and rib L).
Note that the drain valve (rib K) and high level (rib N) are activated
during the extraction.
Rinse cycle 4
Time: 9 minutes (steps 53-70).
This rinse cycle comprises four phases:
1 Filling with water and fabric conditioner (step 53).
Filling with cold water (rib O) to high water level (rib N). Fabric
conditioner is flushed down (rib I).
2 Rinse (steps 54-58)
Filling with cold water (rib O) and high water level (rib N) are activated
during the entire rinse sequence. This controls the level automatically
while the rinse cycle is in progress.
3 Drain (steps 59-70)
The drain valve opens (rib K).
4 Extraction (steps 59-70).
Extraction (ribs H and L).
Note that the drain valve (rib K) and high level (rib N) are activated
during the extraction.
Stop (step 71)
The machine stops and the buzzer sounds (rib M).
Card programming