Operating instructions

37
Card programming
Pre-wash
Time: 4 minutes (steps 0-7)
The prewash comprises two phases:
1 Filling and prewash (steps 0-6)
Cold water is added (rib O) until high water level is reached (rib N) and
is activated during the whole prewash cycle. This adjusts the level
automatically while the program is in progress.
2 Draining (step 7)
The drain valve opens (rib K).
Main wash
Time 9 minutes (steps 8-25).
The main wash comprises three phases:
1 Filling with water and detergent (step 8).
Hot and cold water are added (ribs O and Q). The detergent is flushed
down
(rib C).
2 Washing (steps 9-24)
Heating to the temperature set by the thermostat marked D (rib D).
Filling with hot and cold water (ribs Q and O) and heating (rib D) are
activated during the entire wash sequence. This controls the level and
temperature automatically while the wash cycle is in progress.
3 Draining (step 25)
The drain valve opens (rib K).