Operating instructions

34
Card programming
52
The 16 ribs (A-Q) correspond to the following
functions in the washing machine:
A- Detergent compartment 1
B- Heating, thermostat control B (red light)
C- Detergent compartment 2
D- Heating, thermostat control D (blue light)
E- Liquid supply
F- Heating, thermostat control F (yellow light)
G- For liquid supply
H- Low speed extraction
I- Softener compartment 3
K- Drain
L- High speed extraction (with rib H also cut)
M- Stop with signal
N- High water level
O- Filling with cold water
P- Cool down (see explanation below)
Q- Filling with hot water
Function M
Stop with signal can be used as the last function
in a program or in the event of a temporary stop
in a washing process. A buzzer sounds when the
machine stops and the yellow light in the
RESTART button comes on. After a temporary
stop the machine can be started again by
pressing RESTART.
Function P
Cool down means that cold water is added
gradually until the temperature of the wash water
drops. This avoids the risk of creasing when
changing from hot wash water to cold rinse
water.
The cool down is appr. 3-4°C/min.
0342
0663
53
Fig.
53
Fig.
52
Filling with hot water
Cooling
Filling with cold water
High water level
Stop with signal
High speed extraction
Drain
Softener compartment 3
Low speed extraction
Liquid supply 4
Heating, thermostat control F
Liquid supply
Heating, thermostat control D
Detergent compartmnet 2
Heating, thermostat control B