Operating instructions

23
Mechanical and electrical design
35
1658
Control unit
The control unit is mounted under the top panel
in the machine.
In the unit are the following components:
2-8 Push buttons for manual control.
2 ON/OFF Push button, main supply switch
for the machine.
3 Restart push-button switch. When stop is
programmed the switch lights up and
buzzer goes on. When the switch is
depressed the program will continue from
where it stopped.
4 Switch for selecting GENTLE ACTION.
5 Switch for opening DRAIN.
6 Switch for filling HOT WATER.
7 Switch for filling COLD WATER.
8 Switch for flushing DETERGENT from
compartment 1.
9 Delay unit keeps the door locked appr.
2-3 min. after the program is finished.
Fig.
35