Operating instructions

1:1
438 9153-85/03
1
5357A2L31
BA
1
2
3 4 5
1
2
3
4
5
6
7
8
9
10
E
A
B
C
D
The electronic program unit controls the various functions of the machine in
a certain time sequence with the aid of five built-in standard programs. The
standard programs can also be modified by selecting various options. By
selecting options, the user has access to programs for all types of wash
loads and degrees of soiling.
The control panel consists of program selection buttons (A), option buttons
(B), a combined start, pause and rapid advance button (C), symbols with
LEDs (D) which show the program selected and the program sequence,
plus an alphanumeric display (E).
The alphanumeric display shows illuminated green characters.
In the event of faults, error codes will be displayed on this window. See
Fault codes section of this manual.
Explanation of control panel
A Program selection buttons
B Option buttons
C Start/pause and rapid advance button
D Symbols with LEDs to indicate program selected and programsequence
E Display (for useful information)
Control panel
Fig.
1