Operating instructions

3:1
438 9154-25/02
2253
3
2
1
3141
5134
For coin-operated machines
Insert coins or token(s) corresponding to the
figure shown on the display.
As each coin/token is added the machine counts
backwards towards 00 on the display. The
machine will not start until the display shows 00.
•Press the START button.
•Now the display will show the clock symbol
and two digits. The two digits are the time left
before the wash will be finished.
The two digits indicating time left will not
appear when the machine is first installed.
Each program needs to have been used at
least once before the time left will be
displayed.
• For a time immediately after START is
pressed the colon character (
: ) will flash on
the display. As long as this character is still
flashing a new program can be selected
(without losing anything). This means you still
have the chance to change the setting if the
wrong program has been selected.
•Press PAUSE/START button.
•Select a new program.
• If the new program costs more to run than the
amount already paid, the difference will be
shown on the display. Insert enough coins to
make the display show 00 again.
•Press START again after making any change
in the program selected. The indicator near
the START button will flash while the machine
is paused.
• If you wish to find out the temperature of the
water while the program is in progress, press
and hold any one of the program selection
buttons. (Option on some markets.)
Instructions for use
Fig.
1
Fig.
2
Fig.
3