Operating instructions

2:1
438 9154-05/02
2
3141
3
5134
5134
1
Machine without coin-meter
•Press the START button.
•Now the display will show the clock symbol
and two digits. The two digits are the time left
before the wash will be finished.
The two digits indicating time left will not
appear when the machine is first installed.
Each program needs to have been used at
least once before the time left will be
displayed.
• For a time immediately after START is
pressed the colon character (
: ) will flash on
the display. As long as this character is still
flashing a new program can be selected
(without losing anything). This means you still
have the chance to change the setting if the
wrong program has been selected. To change
the selected program after starting:
•Press PAUSE/START.
•Select a new program.
•Press START again after making any change
in the program selected.
If for any reason you wish to halt the wash cycle
for a time, press the START button for a moment
or two. The program will be suspended and the
drain will remain closed. The indicator near the
START button will flash while the machine is
paused.
To restart the program, press the START button
again briefly.
Instructions for use
Fig.
1
Fig.
3
Fig.
2