Operating instructions

67
Press:
...
Press:
Press:
0225
0226
0227
0228
Press:
Programming
The cursor will appear on the first line of this sub-
program.
Use EDIT UP and EDIT DOWN to move within the
sub-program to reach the line(s) to be altered.
NOTE
ENTER is to be used only as an
acknowledgement when sub-questions are to
be altered. Use buttons EDIT UP and EDIT
DOWN to move around within the program.
When changes have been made to the module
and you reach its last line, the ’’END PROGR.
SESSION Y/N’’ query will appear. Enter NO if you
wish to continue making changes to any other
module and press ENTER.
To move to another module use EDIT UP or EDIT
DOWN buttons and continue as described above.
(Depress and keep down).
PROGR.MODE SELECT SEQUENCE MAINWASH 01
PAUSE WITH BUZZER Y/N
NORMAL ACTION DURING FILLING Y/N
PROGR.MODE SELECT SEQUENCE MAINWASH 01
PAUSE WITH BUZZER Y/N N
NORMAL ACTION DURING FILLING Y/N N
GENTLE ACTION DURING FILLING Y/N N
PROGR.MODE SELECT SEQUENCE
END PROG.SESSION Y/N
PROGR.MODE SELECT SEQUENCE MAINWASH 01
EDIT DOWN IN PROGRAM
Fig.
139
Fig.
140
ENTER
NO
ENTER
ENTER
NO
EDIT
UP
ENTER
Fig.
141
Fig.
142
EDIT
DOWN
EDIT
DOWN
EDIT
DOWN
139
140
141
142