Operating instructions

64
Press:
0215
Press:
0216
0217
Programming
Times for normal action and gentle action
The times for rotating and stationary drum during
normal and gentle action can be programmed. All
times can be selected within the range of 0-30
seconds with 1 second intervals.
Press ENTER when ’’TO END. PRESS ENTER’’ is
displayed in the display window.
Entering the program number
Enter a two-digit number and press ENTER. Note
that the numbers 01-09 are reserved for factory
programs.
If the program number selected is already in use,
there is the option of either deleting the old
program (not applicable to factory programs) or
selecting a new program number.
PROGR.MODE MAINDATA
BUZZER ON WHEN PROGRAM FINISHED Y/N N
GENTLE ACTION ON TIME 00 SEC.
GENTLE ACTION OFF TIME 000 SEC.
PROGR.MODE MAINDATA
NORMAL ACTION OFF TIME 000 SEC.
TO END. PRESS ENTER
INDENDTIFY THIS PROG. WITH A NUMBER
PROG. EXIST! OVERWRITE Y/N N
0214
Press:
Number
keys
KLAR
ENTER
ENTER
Press:
Number
keys
KLAR
ENTER
ENTER
YES
ENTER
NO
Fig.
127
Fig.
128
Fig.
129
Fig.
130
KLAR
ENTER
or
127
128
129
130