Operating instructions

59
Press:
0196
0197
Press:
0199
0198
110
111
113
Programming
112
Drain
Pause with signal
If the question is answered with YES, the washing
machine will stop before the sub-program starts
and a buzzer will sound.
Normal action/gentle action/distribution
Select the method of working while draining.
Distribution action is used before a spin cycle so
that garments are equally distributed around the
drum.
NO to all three questions will cause the drum to be
stationary.
Drain 1/Drain 2
These two questions need to be asked if the
machine is fitted with an additional drain valve
(e.g.) for recycling the rinse water). This
determines the route the drain water takes.
Liquid to tank, answer Yes. No gives normal drain.
The machine’s own drain valve opens
automatically during the drain function.
Time
The emptying time can be programmed in stages
of 10 seconds. The longest time that can be
programmed is 41 minutes 40 seconds
(2500 seconds).
PROGR.MODE SELECT SEQUENCE DRAIN 01
PAUSE WITH BUZZER Y/N N
NORMAL ACTION Y/N N
PROGR.MODE SELECT SEQUENCE DRAIN 01
PAUSE WITH BUZZER Y/N N
NORMAL ACTION Y/N N
GENTLE ACTION Y/N N
PROGR.MODE SELECT SEQUENCE DRAIN 01
DISTRIBUTION Y/N N
DRAIN 1 Y/N N
DRAIN 2 Y/N N
PROGR.MODE SELECT SEQUENCE DRAIN 01
DISTRIBUTION Y/N N
TIME 00 MIN. 00 SEC.
END OF SEQUENCE
Number
keys
KLAR
ENTER
Press:
JA
KLAR
ENTER
YES
RED.
NER
RED.
NED
JA
KLAR
ENTER
YES
RED.
NER
RED.
NED
or
EDIT
DOWN
or
EDIT
DOWN
Fig.
110
Fig.
111
Fig.
112
Fig.
113
Press:
JA
KLAR
YES
RED.
NER
RED.
NED
ENTER
or
EDIT
DOWN
PROGR.MODE SELECT SEQUENCE DRAIN 01
DISTRIBUTION Y/N N
LIQUID TO TANK Y/N N
**
**
*
**
**
*