Operating instructions

56
The following is a summary of the different
questions that can appear under the different
buttons.
NOTE:
The questions which are described do not
apply to all machines. On certain types of
machines, some of the values are
programmed as standard values and need
therefore not be answered.
Pre wash, main wash, rinsing
The questions in these three sub-programs are
identical.
Pause with signal
If the question is answered with YES, the
machine stops before the sub-program is started
and a buzzer sounds.
Normal action/gentle action
Select the action while filling, heating and
washing. One of the alternatives under each
sequence shall be answered with YES, NO to all
six questions will result in a stationary drum.
Level
The water level can be programmed according to
255 scale divisions (units). Level 255
corresponds to a pressure of 600 mm wc. This
means that the values for normal and high level
can vary between different sizes of machines.
The table shows the recommended values for the
relevant machines.
RED.
NED
Number
keys
Press:
Press:
0184
0185
0188
Programming
100
101
102
PROGR.MODE SELECT SEQUENCE PREWASH 01
PAUS WITH BUZZER Y/N N
NORMAL ACTION DURING FILLING Y/N N
PROGR.MODE SELECT SEQUENCE PREWASH 01
PAUS WITH BUZZER Y/N N
NORMAL ACTION DURING FILLING Y/N N
GENTLE ACTION DURING FILLING Y/N
PROGR.MODE SELECT SEQUENCE PREWASH 01
GENTLE ACTION DURING WASH Y/N N
LEVEL 000 UNITS
LEVEL RESET 000 UNITS
JA
KLAR
ENTER
YES
RED.
NER
RED.
NED
JA
KLAR
ENTER
YES
RED.
NER
RED.
NED
KLAR
ENTER
Press:
JA
Machines with fixed drums
Level (units)
Model Low High
FL 125 40 80
FL 185 40 80
FL 244 45 90
S 150 40 80
S 230 45 90
Free-swinging machines
Level (units)
Model Low High
EX 12 145 175
EX 22 160 195
EX 80 85 150
EX 100 140 220
EX 200 100 220
Fig.
100
Fig.
101
Fig.
102
Fig.
103
EDIT
DOWN
or
EDIT
DOWN
or
EDIT
DOWN
or
103