Operating instructions

52
Erase
This button can be used in three different ways:
• Deleting a complete program.
Press ERASE when the display window displays
the adjacent text.
A warning text will then be displayed. Press
ENTER, enter the program number with the
number keys and press ENTER again.
• Deleting a section of a program.
Move forwards or backwards in the program
by using EDIT UP or EDIT DOWN so that you
reach the program section to be deleted. See
under the heading ’’Looking through the
program’’. Press ERASE.
Answer YES and ENTER to the question
’’ERASE THIS MODULE’’.
• Deleting characters when entering text.
To delete individual characters when
programming text, press ERASE. The last
character you entered will disappear. (see
under the heading ’’TEXT’’).
Selecting sub-programs
Press buttons PRE WASH, MAIN WASH,
RINSE, DRAIN, EXTR. and COOL DOWN
designate different sub-programs and can be
used to construct complete wash programs.
When necessary, the same sub-program can be
used several times in the same wash program.
Each sub-program is allocated its own number
(e.g. RINSE 01, RINSE 02 etc.) so that the
different sections can be easily identified.
KLAR
Press:
RA-
DERA
KLAR
Press:
RA-
DERA
JA
0170
0171
Press:
RA-
DERA
0172
0173
Programming
88
Fig.
85
PROGR. MODE SELECT SEQUENCE PREWASH 01
PROGR. MODE SELECT SEQUENCE PREWASH 01
PAUS WITH BUZZER Y/N N
NORMAL ACTION DURING FILLING Y/N N
GENTLE ACTION DURING FILLING Y/N N
ABCDEFGHIJKLMNOPQRSTUVWXYZÅÄÖ !&/=:,.*
KLAR
ENTER
ENTER
Number
keys
ENTER
Fig.
87
PRE
WASH
EXTR.
COOL
DOWN
EDIT
UP
YES
ERASE
EDIT
DOWN
NO
Fig.
86
Fig.
88
ERASE
ERASE
YES
ERASE
MAIN
WASH
RINSE
DRAIN
TEXT
85
86
87