Operating instructions

49
0165
Programming
Enter the information
text
Allocate a program
number
Turn the key to
''RUN''
Answer the questions
etc. . .
Answer the questions
Turn the key to
''PROGRAM''
Select the
sub-program
Select the
sub-program
Programming - general description
Programming can be divided into two categories:
Programming a completely new program or using
an old program as a background.
Programming a completely new program
The wash program is constructed by selecting
different sub-programs with the buttons on the
panel. These sub-programs, when stored after
each other, form the complete final wash
program. Sub-programs can be selected in an
optional sequence.
A program can, for example, be built up in the
following way:
• Pre-wash 1, Drain 1
• Main wash 1, Cool down 1, Drain 2
• Rinsing 1, Drain 3, Extract 1
• Rinsing 2, Drain 4
• Rinsing 3, Drain 5, Extract 2.
When programming, a number of questions must
be answered for each sub-program. The
questions are answered with the YES, NO
buttons and the number keys.
When all sub-programs are programmed, any
questions which apply to
the whole program
must be answered. AN explanatory text can also
be entered (this is displayed when PROG.INFO.
is pressed after selection of a program).
The last thing to be done is to store the program
in the program memory under an unused
program number.
Fig.
80
80