Operating instructions

0148

Introduction

The EX-FC model washer/extractor has been developed to cover the heavy duty

requirements of hotels, motels, nursing homes, hospitals, professional laundries,

restaurants, airlines, schools, colleges and all on-premises laundries where flexibility

and quick formula variation, coupled with high quality automatic washing, are required.

The microcomputer controlled model allows for complete programming of water

temperatures, water levels, wash and extraction periods extraction speeds and supply

injections.

The machines are free-swinging, i.e., the drum is moveable and spring suspended in

relation to the frame. This minimises vibrations transferred to the frame thus simplifying

installation, as no concrete base is required.

The highest speed spin gives a G factor of approximately 300, providing very efficient

water removal during the spin.

All parts of the machine which come into contact with the items being washed are

made of heavy gauge surgical stainless steel, ensuring long life and lasting beauty, as

well as full protection for no-iron fabrics. All electrical components are made accessible

for servicing by simply removing the top panel.

This manual contains a technical description of the machine and instructions for its

installation, operation and maintenance. Together with the wiring diagram which

accompanies each individual machine it should be kept in a safe place for easy

reference.

When ordering spare parts or contacting Wascomat for any purpose always give the

machine serial number, model, voltage and other electrical characteristics appearing

on the nameplate at the rear of the machine.

Fig.