Operating instructions

40
0149
Procedure for use
All operations, including the programming of new wash programs are
carried out from the control panel on the front of the machine. During
normal use, the programming keys to the left of the panel are inoperative.
The control panel comprises the following:
• a display window with four lines each of 40 characters. This shows the
relevant program information, the programming instructions, error
messages etc.
• a keypad with button controls for:
- start/hold/rapid advance
- blocking high speed spin during automatic washing
- manual washing (motor, filling with water, flushing down detergent,
heating and draining)
- programming new programs
- figure values (program selection/programming)
• a key switch for switching between the operating position and the
programming position.
• indicators for dispensing supplies.
Procedure
Fig.
59
START
HOLD/RAPID ADV
HEAT
DRAIN
TEXT
ERASE
EXTR.
RINSE
YES
NO
ENTER
COOL
DOWN
MAIN
WASH
PRE-
WASH
EDIT
UP
EDIT
DOWN
LOW
EXTR.
HOT
WATER
PROG.
INFO.
DOOR
LOCK
°C/°F
FLUSH
MOTOR
DRAIN
CLOSED
COLD
WATER
DETERGENT 1
DETERGENT 2
DETERGENT 3
DETERGENT 4
DETERGENT 5
RUN
PROGRAM
Programming
Indicators, detergent Digital input keypad
Character display
Connection for cassette
Manual controls
Switch
RUN-PROGRAM
Start/Hold/Rapid advance
59