Operating instructions

41
EX 12, EX 22
Contents
Introduction ........................................................................................... 1
Technical data ...................................................................................... 2
Installation............................................................................................. 5
Installation of external liquid supply ...................................................... 9
Electro-Lube Dispenser ........................................................................ 12
Function check...................................................................................... 18
Safety Rules ......................................................................................... 19
Mechanical and electrical design .......................................................... 20
Procedure ............................................................................................. 40
Programming ........................................................................................ 48
Service information .............................................................................. 70
Maintenance ......................................................................................... 71
Trouble-shooting ................................................................................... 72
The manufacturer reserves the right to make changes to design and material
specifications.
Safety instructions
The machine is designed for water washing only.
The machine must not be used by children.
All installation operations are to be carried out by qualified
personnel. Licensed personnel are necessary for all electric
power wiring.
The interlock of the door must be checked daily for proper
operation and must not be bypassed.
All seepage in the system, due to faulty gaskets etc., must be
repaired immediately.
All service personnel must be fully familiar with the operating
manual before attempting any repair or maintenance of the
machine.
The machine must not be sprayed with water, otherwise short
circuiting may occur.
Fabric softeners with volatile or inflammable fluids are not to be
used in the machine.