MANUAL Warwick Amplification Gnome Series Bass Amplifier Heads Gnome · Gnome i · Gnome i Pro
Warwick Amplification Gnome Series - Bass Amplifier Heads Gnome · Gnome i · Gnome i Pro Introduction Thank you for purchasing a Warwick Gnome amplifier - clear, defined bass sound, true power and a built-in USB audio interface on the Gnome i and Gnome i Pro models - all packed in a super compact, lightweight design that will easily fit in your pocket! The Gnome amp heads were developed to offer transparent, crisp and noise-free performance combined with an ultra-portable, lightweight design in an affordabl
Warwick Amplification Gnome Series - Bass Amplifier Heads Gnome · Gnome i · Gnome i Pro Front Panel Description Back Panel Description 1 2 3 4 5 6 1 7 2 3 4 5 1 2 3 4 5 6 1. Input Jack: Accepts 6.35 mm (1/4“) audio jacks for connecting active or passive basses. If you use effects pedals, connect the output from the last unit in the signal chain here. We recommend using high quality instrument cables for best sonic performance and reliable connection. 1.
Warwick Amplification Gnome Series - Bass Amplifier Heads Gnome · Gnome i · Gnome i Pro Setup & Operation To use your new Warwick Gnome amplifier, follow the quick start instructions: 1. Unpacking: Packen Sie den Verstärker vorsichtig aus der Verpackung aus. 2. Powering up: Ensure the Power Switch is in ‚off‘ position, then connect the supplied power cord from the AC Mains In of the amplifier to the mains power outlet. Now flip the power switch on the amplifier to the ‚on‘ position. 3.
Warwick Amplification Gnome Series - Bass Amplifier Heads Gnome · Gnome i · Gnome i Pro Specifications Gnome Gnome i Gnome i Pro Mains Voltage USA/Canda/Japan: 100-120V AC, 50/60 Hz, T3.15AL/250V Euro/UK/Australia/China/Korea: 220-240V AC, 50/60Hz, T1.6AL/250V USA/Canda/Japan: 100-120V AC, 50/60 Hz, T3.15AL/250V Euro/UK/Australia/China/Korea: 220-240V AC, 50/60Hz, T1.6AL/250V USA/Canda/Japan: 100-120V AC, 50/60 Hz, T3.15AL/250V Euro/UK/Australia/China/Korea: 220-240V AC, 50/60Hz, T1.