User manual

WARSANIS 1401FM USER MANUAL
STEREO GENERATOR
SPECIFICATIONS Stand-a-lone Performance
- Frequency Response: 0.5dB, 30Hz-15kHz.
- Separation: >55dB, 400Hz.
- Noise (50 microseconds de-emphasized, 100% modulation): >75dB.
- Total Harmonic Distortion: <0.07% THD, 0.065% SMPTE IMD, 20Hz-15kHz.
- Crosstalk-Linear (referenced to 100% modulation): -60dB.
- Crosstalk-Non-linear (referenced to 100% modulation): -60dB.
- 38kHz Subcarrier Suppression (referenced to 100% modulation): -60dB.
- 76kHz Subcarrier and Suppression Sideband (referenced to 100% modulation): -60dB.
INPUT
- Directely connected to the 1401FM output board.
SCA SUBCARRIER INPUT
- Configuration: One input that sums into composite baseband outputs.
- Sensitivity: 0.8Vp-p for 10% modulation, 1.0Vp-p for 12.5% modulation of main carrier.
- Maximum Input Level: +18dBu.
- Impedance: 600 ohms, unbalanced.
- Connector: BNC. EMI-suppressed.
COMPOSITE BASEBAND OUTPUTS
- Configuration: Two outputs, each with Output Level control, output amplifier and BNC
connector.
- Source Impedance: 0 ohms or 75 ohms (jumper-selectable).
- Load Impedance: 40 ohms or greater.
- Level: Adjustable, 0Vp-p to 9Vp-p (100% modulation) with Output Level control.
- Connector: BNC. EMI-suppressed.
PHYSICAL
- Switches: Stereo/Mono (Stereo, Mono L, Mono R), Crosstalk Test (Operate, Main>Sub,
Sub>Main), 400Hz Generator.
S Jumpers: Pilot On/Off, 400Hz Generator On/Off, Output Impedance.
- User Screwdriver-Adjustable Controls: Output Level (Pilot, Comp 1, Comp 2).
- Safety Standards: CE-marked.
PILOT Circuit Characteristics
- Frequency: 19kHz.
- Accuracy: +/-1Hz
- Injection: Adjustable, 7% to 10%.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
23