User manual

WARSANIS 1401FM USER MANUAL
TECHNICAL SPECIFICATIONS:
GENERAL:
Total harmonic distortion (THD): < 0.12% (below processing threshold).
< 0.3% (all signal processors active).
Signal to noise: > 60 dB (70 dB typical).
Audio input: >20K Balanced.
Input sensitivity: -20 dBm or +10 dBm (jumper selectable).
Input connectors: XLR.
Audio output: Balanced.
Output level: Adjustable up to >+18 dBm.
Output connectors: XLR.
Size: 19" 2 rack units.
Weight: Approximately 7 kilograms.
AC Power: 230 / 115 Volt AC.
PHASE ROTATOR:
This all-pass network makes peaks more
symmetrical to fully benefit the symmetrical peak
overload characteristics of the FM medium (jumper
selectable).
AGC / LEVELER:
Program-controlled time constants provide " 20 dB of
leveling. Selectable.
GATING:
Slows down the release time of the leveler as soon
as the input falls under the gating threshold.
Threshold user adjustable inside the unit.
PRE-EMPHASIS:
25, 50 or 75 µs (sepecify when order).
CROSSOVER:
Phase linear: 6 dB/Okt.
Crossover points: 140, 850, 6000 Hz.
FOUR BAND PROCESSOR:
Program-controlled time constants provide 25 dB of
multiband processing. Time constants adjusted
according to band frequency. Employs delayed
release for distortion reduction. Stereo Tracking per
channel On/Off.
MULTIBAND CLIPPING:
Clipper threshold: Adjustable over a range of 8 dB.
LOUDNESS CLIPPING:
Clipper drive: Adjustable over a range of 8 dB.
Clipper circuit: Distortion controlled.
21