Specifications

50
67 (11)
6.6
91.4
44.4
96
48
SPECIFICATIONS
FEATURES
• Display unit for the EV counter.
• Using this display allows various settings for the EV counter to be made
without the need for a personal computer or other equipment.
•
Able to display each axis measurement value and GO/NG judgment result,
total GO/NG judgment result for all axes, setting details, and errors.
•
DIN compatible compact panel-mounting - cutout dimensions 45 x92
• The required power supply is DC +12 to +24V, 200mA at the terminal
block.(AC adaptor 02ADN460 is available.)
Order No. 02ADD400
Model No. D-EV
Number of
connectable units
One display unit allows external display and setting for one
EV counter.
Displayed digits
It uses a single sign plus six digits (EV counter operates on
eight-digit data internally but displays only the last six digits).
LED display
Channel display (also for display of judgment result) : 3
(three-color LED) Measurement mode display (current,
maximum, minimum, runout) : 2
Status display : 1 (two-color)
Operating switches 4
Switches and their
functions
Channel switching, measurement mode switching (current
value, maximum value, minimum value and runout),
parameter setting, preset, and tolerance setting
Input/output RS Link connectors: 1 in and 1 out.
Error display Overspeed, gage error and others.
Power supply Terminal block (M3 screws), DC +12 to +24V, 200mA
Operating temperature
(humidity) range
0°C to 40°C (20%RH to 80%RH, without condensation)
Dimensions
Unit: mm
+ 0.8
0
+ 0.8
0
Display
Units
Display
Units
RS-232C specifications
1) Compatible plug:
D-sub9 pin (female), inch thread specification
2)
Pin assignment
 
 
Pin No. Description I/O Function
2 RXD IN Receive data
3 TXD OUT Send data
4 DTR OUT Data terminal ready
5 GND — Ground
6 DSR IN Data set ready
7 RTS OUT Request to send
8 CTS IN Clear to send
1, 9 N.C. — Connection impossible
Home position
DTE (Data Terminal Equipment)
Use a cross-type cable.
Communication method Half-duplex, teletype protocol
Data transfer rate 4800, 9600, 19200bps
Bit configuration
Start bit: 1
Data bits: (7, 8) ASCII, upper-case characters
Number of parity bits: None, even, odd
Number of stop bits: 2
Setting the communication
conditions
Set via parameters.
3) Communication specifications (conforming to EIA RS-232C)
EH Counter
DIN size (144 x 72mm) assembly-type display unit
D-EV Display Unit
External display unit for EV counter