Specifications

46
Display
Units
FEATURES
542-075
z
542-075-1
542-071
z
542-071-1
542-073
z
542-073-1
542-074
542-074-1
542-072
542-072-1
SPECIFICATIONS
Order No.
542-075z 542-071z 542-073z 542-074z 542-072z
542-075-1*
1
542-071-1*
1
542-073-1*
1
542-074-1*
1
542-072-1*
1
Model No. EH-101P EH-102P EH-102Z EH-102S EH-102D
Number of gage inputs 1 2
Maximum input frequency 1.25MHz*
2
(differential square-wave)
1MHz*
2
(differential
sine-wave)
Depends on the gage
head connected
Resolution 0.01mm, 0.001mm, 0.0001mm
0.01mm, 0.001mm,
0.0001mm, 0.00001mm
Depends on the gage
head connected
Tolerance judgment display LED display (3 steps: amber, green, red / 5 steps: amber, amber flashing, green, red flashing, red)
Interface
RS-232C / USB / Digimatic code (parameter selectable), 3-step tolerance / 5-step tolerance / digit-BCD (parameter selectable),
total tolerance judgment output, analog output (1V to 4V)
Output Control signal Normal operation signal (NORMAL), open-collector
Input Control signal
Display BANK switch, peak mode, preset, display hold, individual axis hold: open-collector or no-voltage contact signal (with/without contact point)
Power supply voltage DC+12 to 24V (02ADN460: AC adaptor, AC adaptor connecting cable)
Power consumption 8.4W (700mA) or less (Secure power supply more than 1A for each unit.)
Operating temperature 0ºC to 40ºC (20%RH to 80%RH, without condensation)
Dimensions W144 x H72 x D156.7mm
Optional accessory
02ADB440: Output plug with cover
Compatible gage head LG, LGB, LGF, LGK LGF with Origin Point Mark LGB with sine-wave output LGD, LGS, ID-C
Mass 760g 800g 800g 900g 800g
z (suffix): A for 110V, D for 220/230V, E for 240V, DC for China, K for Korea or no suffix for 100V. *1:
Wuthout AC adapter.
*2:
Depends on the gage head connected.
EH Counter
DIN size (144 x 72mm) assembly-type display unit
FEATURES
• Multi-functional counter with functions of zero-set, preset, and tolerance judgment
• Equipped with an RS-232C interface as standard. This allows data transfer to a personal computer, etc.
• A multi-point measuring system can easily be built up with the built-in networking function (RS link). (Max. 12 points)
For differential square-wave output gage head
(single axis)
For differential square-wave output gage
heads (2 axes)
For differential sine-wave output gage heads
(2 axes)
For differential square-wave output gage
heads with Origin Point Mark (2 axes)
For Digimatic code output gage heads (2 axes)