Specifications

40
Display
Units
FEATURES
154.6
48
96
96
6.6 137
(11)
91.4
44.4
154.6
48
96
96
6.6 137
(11)
91.4
44.4
154.6
48
96
96
6.6 137
(11)
91.4
44.4
SPECIFICATIONS
For differential square-wave output gage
head
542-015 542-017 542-016
For differential square-wave output gage
head with Origin Point Mark
For Digimatic code output gage head
542-015 542-017
542-016
Dimensions
Unit: mm
EG Counter
DIN size (96 x 48mm) assembly-type display unit
FEATURES
• Possible to produce 3-step/5-step x 3 kinds of tolerance output and BCD output.
• Smoothing function can reduce fluctuation of display digits.
• Employs the DIN size (96x48mm) and mount-on-panel configuration, which greatly facilitates incorporation into a system.
Order No. 542-015 542-017 542-016
Model No. EG-101P EG-101Z EG-101D
Number of gage inputs 1
Maximum input frequency 1.25MHz*
1
(differential square-wave) Depends on the gage head connected
Resolution 0.01mm, 0.005mm, 0.001mm, 0.0005mm, 0.0001mm 0.01mm, 0.001mm
Tolerance judgment display LED display (3 steps: amber, green, red / 5 steps: amber, amber flashing, green, red flashing, red)
Function
Preset, direction switch, tolerance judgment (3/5-step, 3 kinds). peak (max., min., runout) measurement, calculation with a constant,
smoothing, error display/output, protection over keys
Output
Tolerance judgment L1 to L5 (Switchover between open-collector output and BCD output by means of parameter)
Control signal NOM (normal signal) open-collector
BCD 6-digit (positive/negative-true logic) open-collector (Switchover between tolerance judgment output by means of parameter)
Input Control signal Preset, display hold, peak value clear, tolerance judgment BANK switch
Power supply voltage DC+12 to 24V
Power consumption 6W (500mA) or less (Secure power supply more than 1A for each unit.)
Operating temperature 0ºC to 40ºC (20%RH to 80%RH, without condensation)
Dimensions W96 x H48 x D156mm
Optional accessories
02ADB440: Output connector with cover, 02ADN460: AC adaptor, AC adaptor connecting cable, Connecting cable,
02ADF180: External switch box
Compatible gage heads LGF
, LGK, LGB, LGM, 0.1μm Laser Hologage LGF with Origin Point Mark LGD, LGS, ID-C
Mass 400g
*1: Depending on the gage head connected, *2: Excluding Origin Point Mark and sine wave types