Specifications

19
Gage
Heads
37
8.6
20
Connecting
cable
2m
(screw top
height)
M14
×0.5
M18×1
Thrust stem
Clamp nut
02ADN371
02ADB692
21
（24.2）
ø18
-0.018
0
5
9
18.5
20.6
30.7
61.7
ø15
-0.015
0
13.8
(208.3)
34
8.6
93.6
114.7
6.5 22
20
0.6
4.584.1
Attachment thread
for thrust stem
26 or longer
(stroke)
37
20
8.6
Dimensions with a thrust stem installed
Dimensions with a thrust stem installed
(screw top
height)
Connecting
cable
2m
M14×0.5
Attachment thread
for thrust stem
M18×1
Thrust stem
Clamp nut
02ADN371
02ADB692
18.5
9
5
（24.2）
21
142
34
13.8
（316）
0.6
37
208.6
61.7
20.6
56.1
8.6
4.5
124.9
174
6
29.6
20
51.5 or longer
(stroke)
ø18
-0.018
0
ø15
-0.015
0
(screw top
height)
02ADB681
Thrust stem
02ADB682
Clamp nut
M9.5×0.5
Attachment thread
for thrust stem
M9.5×0.5
46.9
61.5
15.4
6.9（129.5）
34
12.3
17.3
20
37
8.6
6
9.5
14.5
4
ø8
-0.009
0
（13.8）
12
5
45.9
75.7
14
14.8
0.6
Dimensions with a thrust stem installed
Connecting
cable
2m
10.6 or longer
(stroke)
ø9.5
-0.015
0
FEATURES
Order No.
575-326, 575-326-3,
575-326-5, 575-326-7
575-336, 575-336-3,
575-336-5, 575-336-7
575-327, 575-327-3,
575-327-5, 575-327-7
575-337, 575-337-3,
575-337-5, 575-337-7
575-328, 575-328-3,
575-328-5, 575-328-7
575-338, 575-338-3,
575-338-5, 575-338-7
Measuring range 10mm .4” 25mm 1” 50mm 2”
Resolution 0.01mm .0005” 0.01mm .0005” 0.01mm .0005”
Accuracy (20°C)*
1
20μm .001” 20μm .001” 30μm .001”
Measuring
force
Spindle DOWN Approx. 1.2N or less Approx. 4.6N or less Approx. 5.7N or less
Horizontal Approx. 1.1N or less Approx. 4.3N or less Approx. 5.3N or less
Spindle UP Approx. 1.0N or less Approx. 4.0N or less Approx. 4.9N or less
Position-detection method Capacitance-type absolute linear encoder*
3
Response speed Unlimited; measurement by scanning cannot be performed
Output signal Digimatic
External input Origin-setting signal (ABS origin can be changed externally)*
4
Mass 260g 300g 400g
Dust/water protection*
2
IP-66 equivalent*
2
Contact point ø3mm carbide (mounting: M2.5x0.45), 901312
Stem size ø8mm ø15mm
Bearing type Linear ball bearing*
5
Connecting cable length 2m (no suffix), 3m ( suffix “-3”), 5m (suffix “-5”), 7m (suffix “-7”)
Operating environment 0°C to 40°C (20%RH to 80%RH, without condensation)
Standard accessory Wrench for contact point (538610) Wrench for contact point (210187)
Optional accessories
238772: 10mm rubber boot (spare) 962504: 25mm rubber boot (spare) 962505: 50mm rubber boot (spare)
02ADB680: Thrust stem and wrench set
02ADB683: Thrust stem wrench
02ADN370: Thrust stem and wrench set
02ADB693: Thrust stem wrench
*1: Excluding quantizing error of ±1 count.
*2: IP level is the standard of protection against the ingress of solids/foreign matter and water. This may not be applicable for liquids other than water.
*3: Patent registered (Japan, U.S.A., Germany, U.K., Switzerland, Sweden, China)
*4: The ABS origin is user-settable anywhere within the measuring range and holds value through power interruptions.
*5: Patent registered (Japan)
SPECIFICATIONS
Unit: mm
Connector
Dimensions
Unit: mm
LGD Absolute Type
10 / 25 / 50mm range, 0.01mm resolution, Digimatic code (SPC) output
FEATURES
• The use of an Absolute scale in the gage head makes it possible to maintain the user-defined origin
setting even when the power is switched off.
•
Special linear ball bearings are used for the spindle guide to ensure a long service life.
575-326: 10mm range model 575-327: 25mm range model
575-328: 50mm range model