Owners manual

©2012 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc. 8 91256A0
Figure 3
C2
Loop of strap
Figure 4
3. Using the hook from the winch line, connect winch line to
the loop on the termination strap (C2).
4. Refer to your plow operator’s manual for proper plow to
vehicle connection.
CAUTION
Always refer to your winch installation manual for wiring
instructions.
CAUTION
Always refer to your Guide to Winching Techniques for proper
operating procedures.
WARNING
Always tighten all nuts and bolts securely, per the installation and
operation instructions.
WARNING
Always perform regular inspections and maintenance on the winch,
winch mount and related hardware.
CARELESS INSTALLATION AND OPERATION CAN RESULT IN SERIOUS INJURY OR EQUIPMENT DAMAGE. READ AND UNDERSTAND ALL
SAFETY PRECAUTIONS AND OPERATING INSTRUCTIONS BEFORE INSTALLING AND OPERATING THIS PRODUCT.
MAINTENANCE / CARE
1. Inspect all parts on the winch, winch mount, and related hardware prior to each use. Replace all hardware that appears
rusted or deformed.
2. Inspect all nuts and bolts on the winch, winch mount,, and related hardware prior to each use. Tighten all nuts that appear
to be loose. Stripped, fractured, or bent bolts or nuts need to be replaced.
3. Check all cables prior to use. Replace cables that look worn or frayed.
4. Check all moving or rotating parts. Remove debris that may inhibit the part from moving freely.