Owners manual

©2012 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc. 4 91256A0
INSTALLATION INSTRUCTIONS
1. Remove bumper and winch mount (if equipped) by
removing the fasteners, backing plate and lower tube
brackets holding in place. Set aside parts to reinstall later.
2. Remove lower plastic bumper covers, these will not be
reused.
3. Remove plastic hood and plastic grill.
4. Place plow mount (A1) into position on the vehicle. Install
lower fasteners (B1 and B2). Do not tighten completely at
this time.
Figure 1
Figure 3
Figure 4
Plow Mount
B1 and B2
Fasteners
Figure 2
Bumper
Lower tube brackets
Winch mount
Remove Grill
Shown with hood
removed
Bumper covers