Owners manual

©2012 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc. 2 91256A0
NOTICE
Equipment Damage
• Always refer to the Installation and Specication Guide, supplied in the winch kit, for all wiring schematics and specic details on how to wire this WARN product to your vehicle.
Read installation and operating instructions thoroughly.
CAUTION
Moving Parts Entanglement Hazard
FAILURE TO OBSERVE THESE INSTRUCTIONS COULD LEAD TO MINOR OR MODERATE INJURY
• Always take time to fully read and understand the installation and Operations Guide included with this product.
• Never operate this product if you are under 16 years of age.
• Never operate this product when under the inuence of drugs, alcohol or medications.
Read installation and operating instructions thoroughly.
TABLE OF CONTENTS
Tools Required .......................................................................................................page 2
Torque Specications ............................................................................................page 2
Parts List ................................................................................................................page 3
Installation ......................................................................................................... page 4-8
Maintenance/Care ................................................................................................ page 8
TOOLS REQUIRED
- Wrench, 10mm, 13mm, 15mm
- Socket Wrench, 10mm, 13mm, 15mm
- Ratchet
- #30, #25 Torx driver
TORQUE SPECIFICATIONS
Please use the recommended torque specications when assembling this product unless otherwise specied in the
instructions.
FASTENER SIZE FASTENER TORQUE
lb-ft (N.m)
1/4" 8 (11)
5/16" 17 (23)
3/8" 30 (40)
7/16” 48 (66)
1/2" 74 (100)
9/16” 106 (144)
5/8" 148 (200)
3/4” 269 (364)
M4 (2) 3
M5 (4.5) 6
M6 (7.5) 10
M8 (18) 25
M10 (37) 50