Owners manual

WARN® INDUSTRIES PAGE 13 83138A1
Converting Back to Plow
1. The bucket may be converted back to a plow by
removing some of the bucket components. See
the exploded view drawing below for the com-
ponents that will be removed. The Upper latch
bracket on the back of the blade and the pulley
bracket attached to the tube assembly may be left
in place while plowing.
The main section of the bucket and the sides may
remain bolted together during storage. Disas-
semble as needed for easy storage. It is recom-
mended to purchase a replacement wear bar so
that a wear bar may be left on the main section of
bucket.
Figure 21
Figure 22