Owners manual

WARN INDUSTRIES PAGE 5 83111A0
©2009 Warn Industries, Inc.
WARN® and the WARN logo are trademarks of Warn Industries Inc.
Figure 5
Figure 6
Figure 7
INSTALLATION Continued
4. Remove the bolts securing the front bumper/
grill to the frame (Figure 5). Use 1/2” socket and
ratchet to remove these bolts.
5. Remove the radiator side covers (Figure 6).
Use a at blade screwdriver to remove the plas-
tic rivets (3) securing the covers on each side
of bumper. The center part of the rivet will be
pulled up to allow the rivet to be pulled out of
bumper.
6. Install the frame clamp plates (Figure 7).
Lay these plates in the front part of frame until
the lower frame bracket is installed.