User Manual
WARN® INDUSTRIES PAGE 2 79959 Rev A1
Before You Begin
This kit also requires a ProVantage Plow Base Kit, a vehicle specic Plow Mounting kit, and a WARN winch to
raise and lower the plow. Please contact your nearest dealer for part numbers. Please note that much of the
hardware used for this installation can be found in the Plow Base kit. A list of replacement parts may be found
on the last page of this document.
Table of Contents
I. Tools Required ...................................................2
II. Torque Specications ......................................... 2
III. Parts List ............................................................3
IV. Installation .......................................................... 3
V. Maintenance/Care ..............................................5
I. Tools Required
• Ratchet
• Sockets: 15mm
II. Torque Specications
Please use the recommended torque specications
when assembling this product unless otherwise speci-
ed in the instructions.
M10 diameter bolt and nuts: 17 N-m (12 ft-lbs)