Owners manual
WARN® INDUSTRIES PAGE 2 88853 Rev A0
Before You Begin
This kit requires a WARN Plow Blade kit, a vehicle specic Plow Mounting kit, and a WARN winch for raising and
lowering the plow. Please contact your nearest dealer for part numbers.
Table of Contents
I. Tools Required..............................................2
II. Torque Specications....................................2
III. Parts List........................................................3
IV. Assembly......................................................4-9
A. Installing Plow Blade ...............................4
B. Installing Plow Springs.............................5
C. Installing Latch Handle.............................5
D. Tensioning Springs..................................5
E. Installing Mounting Flange........................6
F. Installing Plow Mount................................6
V. Before You Begin Plowing............................7
VI. Installing The Plow.........................................7
VII. Setting Tensioning Springs............................8
VIII. Setting Blade Attack Angle.............................9
IX. Maintenance....................................10
I. Tools Required
• Ratchet- 3/8” drive
• Sockets: 13mm, 14mm, 15mm, 17mm
• Wrenches: 13mm, 14mm, 15mm,
17mm, 24mm
• Hex key: 6mm, 8mm
II. TorqueSpecications
Please use the recommended torque specications
when assembling this product unless otherwise specied
in the instructions.
8mm diameter fasteners: 17 N-m (12 lb-ft)
10mm diameter fasteners: 42 N-m (31 lb-ft)
16mm diameter fasteners: 38 N-m (100lb-ft)