Owners manual

WARN INDUSTRIES PAGE 2 74717 A0
Notes:
Must be used with Warn Front Bumper PN 74255
I. TABLE OF CONTENTS
Parts List page 2
Tools Required page 2
Torque Specifications page 2
Installation page 2-3
Maintenance/Care page 3
II. PARTS LIST
Part Number
Qty Description
74155
1 Skid Plate
74569 1 Hardware Kit
III. TOOLS REQUIRED
-Standard Socket Set
-3/8 Racket
-Standard Wrench Set
IV. TORQUE SPECIFICATIONS
7/16 50 lb. ft. (67.8 N-m)
V. INSTALLATION
1. Install skid plate to front bumper
Mount the skid plate to the Warn front bumper using the 5 holes in the bottom of the bumper and the 5 holes
in the skid plate.
Mount the skid plate to the factory blocker beam using the outer holes on each side of the blocker beam. See
Figure 1.