Application Guide
MOUNTING SYSTEMS
FOOTNOTES:
(O) Will fit standard
bumper and factory
optional Jeep tube
bumper
(8) Hard Winch Cover
not compatible with
Grille Guard
(9) Will not mount
to Mopar accessory
tube bumper
(10) Not compatible with
M8274-50 winch
plate 21395
(11) Requires winch
plate 37170
(12) Requires winch plate
13910 or 11310
(13) Requires Rock
Crawler front
bumper 61856
(V) 20'/6m Power Lead
(PN 32963) or 24'/8m
Power Lead (PN
32966) required for
winching from rear
MOUNTING SYSTEMS/
FRONT BUMPERS
’07–11 JEEP WRANGLER JK (INCLUDES RUBICON,UNLIMITED,
UNLIMITED RUBICON, 2 DOOR/4 DOOR; 2WD/4WD)
Rock Crawler Front Bumper
Bumper only
(order mounting plate below to mount winch, fits with factory light)
...............74255
Mounting Plate Kit for Rock Crawler front bumper
(PowerPlant HP & HD, Endurance 12.0, 9.5ti, 9.5xp,
XD9i, XD9, M8, M6, Tabor 9K & 12K)
.................................................74950
Mounting Plate Kit for Rock Crawler front bumper
(8274-50)
.....74955
Mounting Plate Kit for factory front bumper
(PowerPlant HP & HD, Endurance 12.0, 9.5ti, 9.5xp,
XD9i, XD9, M8, M6, Tabor 9K & 12K)
................................................. 74247
Mounting Plate Kit for factory front bumper
(8274-50)
...............74249
Grille Guard Tube
(requires 74255 WARN Rock Crawler front bumper;
not compatible with 74955, 74247, 74249 winch plates)
............................ 74256
Blocker Beam Skid Plate
(requires 74255 WARN Rock Crawler front bumper)
...................................74570
’97–06 WRANGLER TJ
Rock Crawler Front Bumper
Bumper only
(order mounting plate below to mount winch)
....................61853
Mounting Plate Kit
for factory bumper or WARN Rock Crawler Bumper
(PowerPlant HP & HD, Endurance 12.0, 9.5ti, 9.5xp,
XD9i, XD9, M8, M6, Tabor 9K & 12K)
(O)
..............................................37170
(M8274-50)
(9)
............................................................................ 38671
Grille Guard Tube
For factory front bumper
(8), (11)
........................................... 37171
For WARN Rock Crawler Bumper
(8), (11)
................................61855
’86–96 WRANGLER YJ; ’91 RENEGADE
Rock Crawler Front Bumper
Bumper only
(order mounting plate below to mount winch)
....................61856
Mounting Plate Kit
for factory bumper or WARN Rock Crawler Bumper
(PowerPlant HP & HD, Endurance 12.0, 9.5ti, 9.5xp,
XD9i, XD9, M8, M6, Tabor 9K & 12K)
.................................................21390
(M8274-50)
...............................................................................21395
Grille Guard Tube
For WARN Rock Crawler Bumper
(10), (13)
..............................61858
’86 & PRIOR CJ, SCRAMBLER
Rock Crawler Front Bumper
Bumper only
(order mounting plate below to mount winch)
....................61859
Mounting Plate Kit for factory bumper or WARN Rock Crawler bumper
(PowerPlant HP & HD, Endurance 12.0, 9.5ti, 9.5xp,
XD9i, XD9, M8, M6, Tabor 9K & 12K) ....................................................................
13910
(M8274-50)
.................................................................................11310
Grille Guard Tube
For WARN Rock Crawler Bumper
(12)
...................................... 61861
’99–02 GRAND CHEROKEE
Multi-Mount Winch Frame
(M6000)
(V)
........................................26370
Front Receiver
(rated for use with the M6000 and M6000 SDP only)
............. 61768
’97–01 CHEROKEE (WILL NOT FIT GRAND CHEROKEE, WILL NOT
WORK WITH FACTORY TOW HOOKS)
Trans4mer Grille Guard, Black ................................................ 39637
Brush Guards, Black
(Non-Wrap Around)
......................................39563
Winch Carrier
(XD9i, XD9, M8, M6)
................................................... 29394
SST Stainless Steel Carrier Cover
(for 29394 carrier)
...................63130
Receiver, Black only
(use with Trans4mer only)
.................................. 29397
XJ Front Bumper & Winch Mount
(with grille guard tubes)
(Endurance 12.0, 9.5ti, 9.5xp, XD9i, XD9, M8, M6, Tabor 9K & 12K)
................ 64535
Bumper Extension kit
(required for above bumper)
...........................65852
XJ Front Bumper & Winch Mount
(without grille guard tubes)
(PowerPlant HP & HD, Endurance 12.0, 9.5ti, 9.5xp, XD9i, XD9,
M8, M6, Tabor 9K & 12K)
.................................................................64737
Bumper Extension kit
(required for above bumper)
...........................65852
’84–96 WAGONEER, CHEROKEE, COMMANCHE (DOWN SIZE)
Trans4mer Grille Guard, Black .................................................60766
Brush Guards, Black
(Non-Wrap Around)
......................................39563
Receiver, Black only
(use with Trans4mer only)
.................................. 29397
Winch Carrier
(PowerPlant HP & HD, Endurance 12.0,
9.5ti, 9.5xp, XD9i, XD9, M8, M6, Tabor 9K & 12K)
....................................29394
SST Stainless Steel Carrier Cover
(for 29394 carrier)
...................63130
XJ Front Bumper & Winch Mount
(with grille guard tubes)
(Endurance 12.0, 9.5si, 9.5ti, 9.5xp, XD9i, XD9, M8, M6, Tabor 9K & 12K)
........64535
XJ Front Bumper & Winch Mount
(without grille guard tubes)
(PowerPlant HP & HD, Endurance 12.0, 9.5ti, 9.5xp, XD9i, XD9,
M8, M6, Tabor 9K & 12K)
.................................................................64737
Jeep
’87–91 F-SERIES PICKUP 1/2, 3/4, 1 TON; BRONCO
Multi-Mount Winch Frame
(9.5xp, XD9i, XD9, M8, M6, Tabor 9K)
V
..........26370
Multi-Mount Winch Frame
(PowerPlant HP)
V
..................................75330
Front Receiver ..............................................................................
(6)
’80–86 F-SERIES PICKUP 1/2, 3/4, 1 TON; BRONCO
Multi-Mount Winch Frame
(9.5xp, XD9i, XD9, M8, M6, Tabor 9K)
V
..........26370
Multi-Mount Winch Frame
(PowerPlant HP)
V
..................................75330
Front Receiver ..............................................................................
(6)
’98–03 RANGER 4WD
Trans4mer Grille Guard, Black
(25)
...........................................37133
Light Bar, Black
(*)
.................................................................29169
Brush Guards, Black
(Non-Wrap Around)
......................................30146
Receiver, Black only
(use with Trans4mer only)
..................................29166
Winch Carrier
(XD9i, XD9, M8, M6)
J
.................................................. 29165
Winch Carrier
(9.5ti, 9.5xp)
............................................................ 39781
Ford
MOUNTING SYSTEMS
FOOTNOTES:
(J) Must be revision
#BØ for 9000 winch
PN 27550 or 28500
(V) 20'/6m Power Lead
(PN 32963) or 24'/8m
Power Lead (PN 32966)
required for winching
from rear
(6) Front Receiver
applications (does
not fit diesels) ’80–91
Pickup 1/2 Ton (2
& 4WD) and 3/4 Ton
2WD is PN 25862.
’80–91 Pickup 3/4
Ton 4WD with leaf
springs is PN 25852
(25) Must be Revision
B0 for 2001 and
later models
(*) Cannot be used with
winch carrier when
winch is mounted
MOUNTING SYSTEMS