User Manual

WARN INDUSTRIES
5
MOUNTING
WARNING
TO AVOID INJURY AND PROPERTY
DAMAGE: Use caution if moving or repositioning the
vehicle controls so as to not compromise the safe
operation of the vehicle.
Select a mounting position that will provide clearance
for all vehicle controls.
Before securing the switch cable with tie wraps, make
sure that the handlebars have full range of motion.
1. Disconnect the vehicle battery cables,
negative terminal first. All work with
electrical wires and cables must be
completed with the battery completely
disconnected from the vehicle wiring.
Not to scale. Do NOT use as a template!
21.1mm
(.83in.)
36.8mm
(1.45in.)
STEP 3: MOUNT YOUR REMOTE EQUIPMENT
Optional
AXON
VRX
AXON
VRX
VRX 45  AXON 45 / 55
HANDLEBAR SWITCH MOUNTING
REMOTE SOCKET MOUNTING
DASH SWITCH MOUNTING
WARN INDUSTRIES
6
ELECTRICAL CONNECTIONS
WARNING
Always place the supplied
terminal boots on wires and terminals.
WARNING
Never route electrical cables
across sharp edges.
WARNING
Never route electrical cables near
parts that get hot.
WARNING
Never route electrical cables over
battery terminals.
WARNING
Always remove jewelry and wear eye
protection when making battery connections.
WARNING
Never route electrical cables through or
near moving parts.
WARNING
Always insulate and protect all
exposed wiring and electrical terminals.
WARNING
Never mount contactor with electrical
terminals touching metal objects.
Blue
Red
Black
Black
Green
Red
Yellow
Remote Socket
(optional)
Red
Brown
STEP 5: WIRING YOUR EQUIPMENT
WARNING
Always verify area is clear of fuel lines,
fuel tank, brake lines, electrical wires, etc., when
drilling.
STEP 4: MOUNT YOUR CONTACTOR VRX Winch Only
/N
MCJO
3.6-3.9 Nm
32-34.5 lb-in
CONTACTOR MOUNTING VRX Winch Only
VRX 25 / 35
*Wire splice not included