Product guide

WWW.WARN.COM 3736 CUSTOMER SERVICE 1.800.543.9276
Select the part numbers for: 1) Plow blade. 2) Plow base assembly. 3) Mounting plate assembly. 4) Plow blade-raising mechanism.
You have three choices of how you can raise and lower your WARN Blade: actuator, manual lift or winch.
HOW TO ORDER YOUR WARN ATV PLOW SYSTEM
4.) PICK YOUR BLADE RAISING MECHANISM
48" steel wear bar: PN 39416
54" steel wear bar: PN 39415
60" steel wear bar: PN 62601
Replacement J-Bolt Kit: PN 36682
ATV PLOW, ELECTRIC ACTUATOR
REPLACEMENT PARTS FOR ATV PLOW ACTUATOR PN 67650:
• Switch kit PN 69660
• Motor PN 68167
• Wiring harness with relays PN 68194
• Relays PN 66510
• Wire rope PN 68135
• Termination Strap PN 68191
• Designed with a dual purpose in mind:
to lift the plow without manual effort, and leave
the winch for what it was designed to do.
• Pulling capacity is more than enough power to
reliably lift the heaviest blade.
• Actuator will operate only with the ignition on
and comes standard with a thermal limiting
switch. The limiting switch eliminates the
possibility of damage to the ATV, plow or
Actuator.
• All-weather, handlebar mounted switch can be
operated without removing your
hand from the grip.
• Easy to install kit that fits all WARN
plows. Kit includes a handlebar switch,
wiring harness, cable
termination strap, and all necessary
hardware.
PN 67650
NOW
PATENTED
1.) CHOOSE YOUR PLOW BLADE
3.) PICK YOUR PLOW MOUNTING KIT
WARN CYCLONE ANGLED PLOW BLADE
STANDARD PLOW BLADE
• Tapered design and
aggressively curved profile
steer snow or dirt up and away
from the surface you’re
clearing.
• Made from heavy-duty 11-
gauge steel backed up by
extra-heavy ribbing.
• Durable powder coat yellow
finish.
• Heavy-duty skid plates are
made of 1/4” gauge steel with
zinc finish.
• Comes with replaceable steel
wear bar.
• Available in 54” or 60” widths.
PN 68710
54" Cyclone Blade
PN 68200 60" Cyclone Blade
• Made from 14 gauge high-
strength low alloy steel with
3/16” outer blade ribs to
provide superior strength and
rigidity.
• Blade height is 16-3/16”.
• Durable black powder coat
finish.
• Comes with replaceable steel
wear bar.
• Now includes heavy-duty skid
plates made of 1/4” gauge
steel with zinc finish.
• Available in 48”, 54” or 60”
widths.
PN 70948
48" Standard Blade.
PN 70954 54" Standard Blade.
PN 70960 60" Standard Blade.
2.) ORDER THE PLOW BASE
WARN ATV PLOW MOUNTING KIT
• Mounting plate remains attached to the
ATV and becomes a structural component
adding rigidity to the ATV during plowing
operations.
• Designed for high ground clearance and
quick plow installation or removal.
• Placement is forward of the foot pegs to
avoid any reduction of ground clearance or
operating interference.
• Quick release pins attach or detach the
plow blade and base assembly in a matter
of moments.
PART NUMBERS: Each kit is engineered to
fit a specific ATV make and model.
Applications are listed on the master
application chart in the center of this catalog.
PLOW BASE/TUBE ASSEMBLY
• Universal design. One part number fits
all WARN ATV plow blades and
mounting kits.
• Oversize bushings dramatically reduce
wear and absorb the shock of plowing.
• Durable black powder coat finish.
PN 62100 Fits all ATV plow blades and
mounting kits
POWER-PIVOT
• Bolts to plow base assembly.
• Electrically pivot your plow blade at the
touch of a button from the comfort of
your seat.
• Powerful motor with 4-stage planetary
geartrain can turn blade up to 25°, even
under load and without slipping.
• Color-coded wiring for quick and easy
assembly on WARN Plow Base.
• When using the Power Pivot, you must
use a winch for plow lifting.
PN 73860 Not for use with Universal Manual Lift
or ATV Plow Actuator.
BASE/TUBE
ASSEMBLY
MOUNTING
PLATE
Premium quick adjust skids (for Cyclone and
Standard Blade PN 70948, PN 70954 and
PN 70960)
PN 69212
Treaded shaft skids (for Standard Blade PN
37574, PN 38732 and PN 38121)
PN 38330
REPLACEMENT PARTS FOR PLOW BLADES:
Replacement parts :
• Bushings and spacers PN 68169
• Wire ropes PN 68171
• Brake cable PN 68193
• Termination Strap PN 68191
• Ratchet and paul kit PN 69268
WARN UNIVERSAL MANUAL LIFT
• Delivers maximum lifting power with a minimum of effort.
• Lever-style arm requires minimal force to lift the blade, reducing
operator fatigue.
• Overall lift height is 8 inches or more, so you can clear obstacles
like curbs.
• Lift is easily detached along with the entire plow/arm assembly,
freeing the ATV for other uses.
• Built of durable powder coated steel and zinc plated hardware.
PN 65510
For use with WARN plow kits only
XT15, 25 OR 30 WINCH
• An excellent choice if you want a multi-use piece
of equipment.
• For durability, the WARN
synthetic rope and/or plow
roller fairlead is strongly
recommended.
www.ideatuli.fi