Instructions / Assembly

Heater Information
2
8
9
Before You Begin
Introduction
Product Specification and details
Important Information
Do’s and Dont’s
How to select the correct heater(s)
Floor Build up examples
Compatible Wood Flooring
Compatible Underlay
Important carpet information
Compatible Carpets
Restrictions on furniture placement
Controlling your system
Electrical connections
Testing
Troubleshooting
Step 1: Planning Your Installation
Step 2: Check and prepare the subfloor
Step 3: Laying out your heating mats
Cutting and turning
Step 4: Installing the floor sensor
Step 5: Installing the flooring
Step 6: Connect the thermostat
Warranty
Exclusions
Control Card
Contents
7
4
6
13
10
12
11
3
ITEMS REQUIRED FOR SYSTEM INSTALLATION:
• The customized installation plan (or
layout)
• A Warmup thermostat with an integrated
Ground Fault Circuit Interrupter or separate
GFCI breaker installed in the household
panel
• Digital ohmmeter (multimeter)
• Electrical housing boxes/switch plates
• Electrical conduit
• Junction box
• Adhesive aluminium tape
Warmup® Foil mats must be fitted directly
on top of the underlayment/insulation, and
directly under the wood laminate flooring.
(The “underlayment” is also known as the
“pad”)
See page 7 for information on suitable
materials.
14
15
16
17
19
If these instructions are followed you should not have any problems. However, if you do require assistance at
any stage please call the Warmup helpline: US: [phone] / Canada: [phone]
You can also find a copy of this manual, wiring instructions, a list of frequently asked questions and more
helpful information on our websites:
US: www.warmup.com / Canada: www.warmup.ca