Specification
™
The world’s
best-selling electric floor heating brand
WARMUP INC.
USA: us@warmup.com
Tel.: 1-888-927-6333
www.warmup.com
CANADA: ca@warmup.com
Tel.: 1-888-592-7687
www.warmup.ca
™
The world’s
best-selling electric floor heating brand
Warmup StickyMat
SPECIFICATION SHEET WSC-0802
ADVANTAGES
• The thinnest dual-uoropolymer coated heating wire (less than 1/8” diameter).
• StickyMat with pressure sensitive adhesive, for the fastest and most secure installation.
• Can be repositioned easily without losing adhesion.
• The pressure sensitive adhesive ensures that no wire or mesh is raised when tiling or covering with self-leveling compound.
LIMITATIONS
• Do not cut the cable or apply the cable with staples. Apply caution to avoid nailing through the cable and avoid installation under
permanent xtures.
• The StickyMat is designed for primary heating provided the suboor is properly insulated. Refer to Warmup’s WIB-Warmup Insulation
Boards to provide additional insulation over uninsulated slabs on grade.
SPECIFICATIONS
Operating voltage 120V
Width 3ft
Cable thickness 1/8” (3mm)
Inner / Outer Insulation Advanced uoropolymer (ETFE)
Output rating 14W/sq ft
Coil tail length
10ft (3m)
Approvals cULus
PRODUCT CODES
NADWM-sqft-voltage
PRODUCT DESCRIPTION
The Warmup StickyMat system is a series of small 3ft wide mats
aimed for bathroom installations under tile & stone. It is specically
suitable for time-restricted environments such as residential multi-
housing and commercial units.
StickyMats are a dual-adhesive with double sided tape as well as a
pressure-sensitive adhesive on the entire mesh, allowing for a fast
set-up. They can be combined and patch-worked into the room to
customize the coverage. Each mat is built with a dual-conductor cable
with a single power cord to connect to the thermostat.
StickyMats are available in 3x3, 3x5, 3x6, 3x8 and 3x10ft.