Instructions / Assembly

2
Before you Begin
Thank you for purchasing the Warmup® StickyMat.
This manual contains IMPORTANT information regarding the safe use and installation of your heating mats.
Please read through the entire manual carefully before you install or use the product.
ITEMS INCLUDED IN THE WARMUP® KIT:
• StickyMat
• Installation Manual
YOU MAY ALSO NEED:
• 3iE thermostat with GFCI
• Floor Sensor (included with 3iE)
• Alligator Tester or Multimeter
Double check your measurements and ensure that you have the correct mat size for the area you wish to
heat. The heating element MUST NOT be installed under appliances or permanent fixtures and fittings such
as refrigerators, cabinets, tubs, vanity units etc. Below is a quick reference guide.
If you are missing any items from the box or believe that you have the incorrect heating mat to cover the
area required, please call the helpline for further assistance.
Product Information
The Warmup heating mat consists of a twin conductor resistance-heating element woven onto a fiberglass
mat. The heating element is insulated with Fluoropolymer (FP) with high dielectric strength and high
temperature properties. The conductors are covered by a metallic sheath providing additional mechanical
strength and a ground path. A final outer jacket of Fluoropolymer is given to make it sturdier and provide
corrosion protection.
The heating cable is terminated at one end with a 10’ cold lead. The conductor cores and ground braid are
factory joined in a water resistant joint assembly to each supply conductor and ground conductor of the
unheated lead. The heater is terminated at the other end with a smaller water resistant joint.
Inspect the entire heating cable for damage. This includes the factory made joint and end termination. If
any parts are damaged contact the technical helpline.
The Warmup Heating Mat is approved.
Model Mat length
(ft)
Width Area
(Sqft)
Wattage Amps Resistance
NADWM-9-120 3.0 3.0 9 126 1.05 114.3
NADWM-15-120 5.0 3.0 15 210 1.75 68.5
NADWM-18-120 6.0 3.0 18 252 2.10 57.1
NADWM-24-120 8.0 3.0 24 336 2.80 42.9
NADWM-30-120 10.0 3.0 30 420 3.50 34.3