Specification

™
The world’s best-selling electric floor heating brand
™
The world’s best-selling electric floor heating brand
FLOOR HEATING SYSTEM ON PRE-ASSEMBLED MATS
SUBMITTAL SHEET WSC-0720
WARMUP INC.
USA: [e-mail]
Tel.: [phone]
www.warmup.com
CANADA: [e-mail]
Tel.: [phone]
www.warmup.ca
TECHNICAL DATA
Applications
Suitable Floor Coverings
Tile, Stone, Porcelain
Vinyl and LVT’s
Glued-down carpet
Glued-down wood
Suitable Sub-Floor
Plywood & OSB
Polymer-modied leveler
Concrete slab
Cement boards
Insulation Boards with cementitious coating
Min. coverage
3/8” thinset or self-leveling compound
Max. coverage
3/4” thinset or self-leveling compound
Installation under Tile, Stone, Porcelain
Clean the suboor from debris and sharp protusions
Consider deection and structural aspects prior to installation
Verify resistance of cable per instructions prior to install
Connect multimeter or “alligator” tester provided
Lay out the mat using the pre-applied double-sided tape
Install oor sensor (supplied with controller)
Consider scratch coat or thin leveler prior to installing oor covering
Install oor covering per manufacturer’s instructions
Installation under Glued-down oors (LVT, Wood, Carpet)
Clean the suboor from debris and sharp protusions
Ensure suboor is level, if needed level, the oor rst
Verify resistance of cable per instructions prior to install
Connect multimeter or “Alligator” tester provided
Apply mat to suboor using pre-applied double-sided tape
Install oor sensor (supplied with controller)
Cover the mat with self-leveling material, min.3/8” max. 3/4”
Install oor covering per manufacturer’s instructions