Instructions / Assembly

42
TECHNICAL SPECIFICATIONS - DCM-PRO MEMBRANE
THICKNESS "
COMPOSITION DCM-PRO Fleece membrane:
POLYPROPYLENE MEMBRANE WITH
FLEECE BACKING
DCM-PRO Peel and Stick membrane:
POLYPROPYLENE MEMBRANE WITH
SELF-ADHESIVE BACKING
COLOR RED
SPACING 3 " & 4 "
SIZE 2’6” x 3’3” sheet
46’7” x 3’3” roll
TECHNICAL SPECIFICATIONS - PERIMETER STRIP
COMPOSITION SELF-ADHESIVE BACKED
POLYETHYLENE FOAM STRIP
SIZE 82 roll x (H) 1
1
/
8
” x (T)
3
/
8
”
TECHNICAL SPECIFICATIONS - DCM-PRO CABLE
OPERATING VOLTAGE 120 V and 240 V: 60Hz
COLOR BLUE
THICKNESS "
OUTPUT RATING ~13 W/ (3 PEG - 3 ”)
INNER INSULATION ECTFE
OUTER INSULATION PVC
MIN. TEMPERATURE
INSTALLATION
5°F (-15°C)
CONNECTION 10 (3m) “COLDTAIL” CONNECTION
NADCM-C cable is suitable for wet locations "Type W"
Technical Specications
Warmup NADCM-C cable
Warmup NADCM-C heating cables are UL certified or listed to the following
standards and usage:
• UL 1683 "Electric Heating Products For Installation Under Floor
Coverings".
• CAN/CSA-C22.2 No. 130-16 "Requirements for Electrical Resistance
Trace Heating and Heating Device Sets".
Where peg spacings of 3, 3-4 and 4 are used, the UL certification applies to
the entire system, including the membrane. For UL-Approved manual please
visit warmup.com
The only UL-Approved Membrane System in North America
Warmup DCM-PRO membrane is tested to the following standards:
Tile Council of North America
• ANSI A118.12: "Specification for Crack Isolation Membranes for Thin-Set
Ceramic Tile and Dimension Stone Installation"
• ASTM C627: “A Standard Test Method for Evaluating Ceramic Floor Tile
Installation Systems Using the Robinson-Type Floor Tester”
Warmup Thermostats - 4iE & Tempo (ELT) are tested to the following
standards:
• Automatic Electrical Controls - Part 1: General Requirements
[UL 607301:2016 Ed.5]; [CSA E60730-1:2015 Ed.5];
• UL Standard For Safety For Automatic Electrical Controls For Household
And Similar Use – Part 2-9: Particular Requirements For Temperature
Sensing Controls [UL 60730-2-9:2017 Ed.4]; [CSA E60730-2-9:2015 Ed.3];
• Ground-Fault Circuit-Interrupters [UL 943:2016 Ed.5]; [CSA
C22.2#144.1:2016 Ed.2]
Certifications