Instructions / Assembly

39
Control Card
WARNING
Radiant Floor Heating
Systems - Risk of
electric shock
Electric-wiring and heating panels
contained within the floor. DO NOT
penetrate with nails, screws, or similar
devices. DO NOT restrict the thermal
emission of the heated floor.
Heater Location
.............................
............................
Total Wattage
................................
ATTENTION:
DO NOT cut or shorten the heating element.
Ensure that the entire heating element(s) including the joints
are installed within the layer of thinset or levelling compound.
DO NOT tape over the joints or heating cable as this may
insulate them, causing them to fail. The heating element must
be used in conjunction with a GFCI.
Heater
Model
Resistance
Before
Resistance
Aer
Insulation
Resistance
(Pass)
Floor sensor
resistance
Date Signed Company stamp/name
This form must be completed as part of the Warmup Guarantee.
Ensure that the values are as per the instruction manual. Please
register your warranty online by visiting warmup.com or warmup.ca
This card along with a plan showing the heater layout must be
situated close to the consumer unit in a visible place.
Warmup Inc, 52 Federal Road, Unit 1F,
Danbury, CT 06810
T: [phone] F: [phone] www.warmup.com
Warmup Canada
T: [phone] F: [phone] www.warmup.ca