Instructions / Assembly

Contents

Quick Install Guide ...................................................................4

Components Required for Installation .....................................6

Do’s & Don’ts ............................................................................7

Step 1 - Electrical Supply ........................................................9

Step 2 - Subfloor Considerations .......................................... 12

Step 3 - Subfloor Preparation ............................................... 16

Alternate Installation - Fixing Strips ................................... 17

Step 4 - Lay DCM-PRO membrane ........................................ 19

Step 5 - Layout Planning ....................................................... 20

Step 6 - Install DCM-PRO Cable ............................................. 25

Step 7 - Select Floor Covering ............................................... 27

Waterproofing ..................................................................... 28

Step 8 - Lay the Floor Covering ............................................. 30

Step 9 - Connect the Thermostat .......................................... 32

Troubleshooting ..................................................................... 33

Performance Troubleshooting ............................................... 35

How to test the heater & floor sensor ..................................... 37

Layout Plan ............................................................................ 38

Control Card ...........................................................................39

Warranty ................................................................................. 40

Technical Specifications ........................................................ 42

WARNING

Your Warmup® Underfloor heating system has been designed so that

installation is quick and straight forward, but as with all electrical

systems, certain procedures must be strictly followed. Please

ensure that you have the correct heater(s) for the area you wish

to heat. Warmup plc, the manufacturer of the Warmup® DCM-PRO

System, accepts no liability, expressed or implied, for any loss or

consequential damage suered as a result of installations which in

any way contravene the instructions that follow.

It is important that before, during and aer installation that all

requirements are met and understood. If the instructions are

followed, you should have no problems. If you require help at any

stage, please contact our helpline.

You may also find a copy of this manual, wiring instructions and other

helpful information on our website: