Instructions / Assembly
28
• Cut a length of Warmup
waterproof tape to suit and
press into the thinset along
the wall perimeter using a
trowel, removing any air gaps
or creases.
• Apply a suitable waterproof
/" layer of thinset to the
membrane, walls and
penetrations through the
membrane, 4" either side of
the joint, ensuring there are no
gaps or voids.
• Cut the perimeter strip to the
same level as the DCM-PRO
membrane.
• Reapply the removed portion
of the perimeter strip over the
top of the Warmup waterproof
tape flush with the floor.
21
3
4
There are instances where waterproofing will be required, such as in
wetrooms, where there will be significant exposure to water.
If using a proprietary waterproofing system, a levelling compound
should first be laid over the Warmup DCM-PRO system to provide a
finished surface to install over. Follow the steps below when using
the Warmup DCM-PRO waterproofing products to waterproof the
installation:
Waterproong