Specification

™
The world’s best-selling electric floor heating brand
DCM-PRO FLEECE-BACK MEMBRANE
SUBMITTAL SHEET WSC - 1001
WARMUP INC.
USA: [e-mail]
Tel.: [phone]
www.warmup.com
CANADA: [e-mail]
Tel.: [phone]
www.warmup.ca
™
The world’s best-selling electric floor heating brand
PRODUCT CODE
•DCM-M-80, box of sheets to cover 80 sf
•DCM-M-150, roll to cover 150 sf
•DCM-MW-80, box of sheets to cover 80 sf
•DCM-MW-150, roll to cover 150 sf
PRODUCT DESCRIPTION
The TCNA-tested DCM-PRO anti-fracture Membrane can be installed on wood and cement suboors using any tile adhesive.
The patented DCM-PRO design allows for more adhesive to connect with the cable thereby distributing the heat more evenly.
There is no waiting required after installation so you can begin laying the ooring immediately. The DCM-PRO Membrane is
ready to tile.
Installers can use either modied or unmodied adhesives over the membrane to suit their installation needs. The DCMPRO
Membrane can even be covered with self-levelling mortars (SLU’s) to allow installation of small format tiles and other
oor types such as glue-down wood and LVT’s, to be laid on top of the DCM-PRO System. The unique design of the DCM-PRO
Membrane protects the cable from installation damage leading to a reduced risk of cable failures.
The membrane has been successfully tested to ANSI 118.12 standards and performed well on the Robinson test (ASTM C-627).
It is the highest-rated membrane for floor heating systems.
FEATURES
• Under 6mm – 1/4” thick
• Rated as Anti-Fracture membrane as tested by the TCNA against ASTM 118-12
• Installs with regular or modied thinsets
• Ready to tile over
• Use any adhesives or SLU’s on top for ooring installations
• Highest heating outputs with DCM-PRO Cable
• Lowest running costs with 1/4” Warmup Insulation Boards (WSC-0725)
• Smart operation with 4iE-04 Smart WiFi Thermostat (WSC-0926)
APPLICATION
The DCM-PRO Membrane can be installed using modifed thin set over plywood and concrete suboors. Warmup DCM-PRO
Cable can be installed at 3 or 4 pegs to achieve the desired heat output. See chart.