Instructions / Assembly

8
Welcome to the 6iE
Getting Started
Thu 11 Mar 17:00
74.0° until 11:30
65.0° limit
Floor
+
70.0
72.0°
Thu 11 Mar 17:00
74.0° until 11:30
65.0° limit
Floor
+
70.0
72.0°
Thu 11 Mar 17:00
74.0° until 11:30
65.0° limit
Floor
+
70.0
72.0°
Back
Menu
Mode
Program
Energy Monitor
Settings
Mode
Program
Manual
Heating Off
With Frost Protection
Vacation
Back
Heating Indicator
Displays when heating is active
Error Messages
See Troubleshooting Page
How to quickly change the temperature
How to quickly change mode
Current Floor/Air temperature
Floorwillbedisplayedifoor
sensor is installed and switched on
Temporary Override
Use the slider or press the +/- icons
to set a temporary override until
next heating period
Target Temperature
Temperature you wish the
thermostat to achieve
Weather
7-day forecast for your area
Menu
Air/Floor limit
Willonlybedisplayedwheninoor
mode and an air limit is set.
Use the slider or press the +/- icons to change
your target temperature.
If in “Program” mode this will set a temporary
override until your next heating period.
If in “Manual”modethiswillsetaxedtarget
temperature.
Once the target temperature is set above
current oor/airtemperaturetheheating
indicator will appear.
Mode select allows you to quickly change from program, manual or
vacation modes. You can also switch “Frost Protection” on or simply switch
the “Heating O”fromhere.Frostprotectionwillensurethattheoor/air
temperature does not drop below 44.0°F.