Instructions / Assembly

15
Advanced settings Temperature
limits
Set Min./Max. settable temperature limits
Overheat limit Set Overheat airlimitifoorsensorhas
been installed
Control Period Set between 10 - 60 mins.
Control period checks the dierence in the current measured
temperature and the set temperature in a proportional integral
algorithm to maintain a steady temperature.
About Detailsaboutthe6iE’scurrentrmware,
MAC address and WiFi connection
information.
Display is blank Brightness 1. Check that the standby brightness is not
settoO.
Power 2. (Electrician Required) Electrician
required to verify power is going to the 6iE
and that it is correctly wired.
ER1/ER2 Sensor Error (Electrician Required) Electrician required
toverifythattheoorsensorhasbeen
wired correctly. If it is correctly wired
the electrician will need to check the
resistanceoftheoorsensorusingamulti
meter. For temperatures between 68°F
-86°Ftheresistanceoftheoorsensor
should measure between 8K ohms and
12K ohms.
Iftheelectricianndsafault,andthe6iEis
in the room to be heated then it can be set
into“AirMode”.
Tosetinto“AirMode”,gotoSensors&
Application in Advanced Settings and
switchtheprobeo.
Heating is coming
on earlier than
programmed times
Adaptive
learning (Early
Start) On
Adaptive learning will use the historic
heating/cooling rates for the time of
day, historic external temperatures and
the forecast external temperatures, to
work out the heating start time in order
to reach the comfort time at the start of
the comfort period. It will only work in
Program Mode.
Cannot to set above a
certain temperature
Floor Type
Temperature
Limits
Delicateoorcoveringsneedtohavetheir
temperatureslimited.Ifthenishedoor
is set for wood, laminate, vinyl etc. you are
unable to set the temperature above 81°F.
WiFi Error Symbol WiFi not setup If you have not done so, download
the MyHeating App, go to Settings and
Network setup and follow the on screen
instructions to connect to a WiFi Network.
WiFi
disconnected
Follow the step above to try and to
re-connect to the WiFi Network.
If the 6iE still fails to connect, see WiFi
Troubleshooting.
Clock Sync Icon Time and Date
not set
Connect the 6iE to a WiFi network or
alternatively set the time and date from
the settings menu.
Advanced Settings
Troubleshooting