Installation Guide

ASSEMBLY/OPERATION:
Installation Support •[phone] • WarmlyYours
CONTROL
SWITCH
INSTALLATION GUIDE
For TWS5 Series hardwired towel warmers.
2H
4H
STEP 1: Verify that you have all of the
necessary components:
• Main towel warmer assembly with
plug-in cord (1 piece)
• Mounting platforms with feet (2 pieces)
• Long screws (4 pieces).
STEP 1
2
STEP 2: Set up materials in a convenient work
area. It may be easier to attach the mounting
platforms in Step 3 if the bottom of the main towel
warmer assembly slightly overhangs something
like a workbench.
STEP 2
STEP 3: Use a screwdriver to attach the mounting
platforms to the bottom of the main towel warmer
assembly. The bottom of the main towel warmer
assembly will have screw holes that match the
holes in the mounting platforms.
STEP 4: Once fully assembled, plug the towel
warmer into a compatible, 120 VAC,
GFCI-protected outlet.
STEP 4
STEP 5: Use the control switch to operate the
towel warmer according to your preference.
See "Control Switch Instructions" for more
information.
STEP 5
2
STEP 3
2H
4H