Installation Manual
Table Of Contents
- TW-Elements-Manual_10196_1
- TW-Elements-Manual_10196_2
- TW-Elements-Manual_10196_3
- TW-Elements-Manual_10196_4
- TW-Elements-Manual_10196_5
- TW-Elements-Manual_10196_6
- TW-Elements-Manual_10196_7
- TW-Elements-Manual_10196_8
- TW-Elements-Manual_10196_9
- TW-Elements-Manual_10196_10
- TW-Elements-Manual_10196_11
- TW-Elements-Manual_10196_12
- TW-Elements-Manual_10196_13
- TW-Elements-Manual_10196_14
- TW-Elements-Manual_10196_15
7
Affi xing the Towel Warmer to the Wall - cont’d
WARNING
Measure all dimensions prior to rough-in and installation.
Elements™ model: TW-E4PCP
Anchor Points*
Anchor Points*
Pin Hole
* Note: Anchor points must be attached to a stud.
†
Note: 12” between brackets is recommended, but the top
bracket can move up to 2” vertically as desired.
Stud
12” (305mm)
Recommended
†
2” (51mm)
8
7/8
” (200mm)