Installation Guide
12
Product Construction - Towel Warmer
The towel warmer is constructed from 304 stainless steel with a
wall thickness of between 0.6 mm and 1.0 mm. The towel warmer is
heated by a UL listed wire. The mounting brackets are manufactured
from stainless steel and nished to match the nish of the specic
model.
Connection Method
The heating wire is connected to a non-heated lead by a mechanical
crimp connection, sealed with a heat shrink tube. Electricity is fed
into the Towel Warmer via a Power Leg. Power can then be fed to
the control unit which may be located anywhere in the room.
Safety Ratings
The main electrical line feeding the Towel Warmer must comply per
local and national codes.