Installation Guide

OPERATION
Manual
Use the ON/OFF switch located on the bottom right side (when facing the towel
warmer) to control when you want the unit to warm. Refer to Diagram D for switch
for location.
With a Control
You may want to pair your towel warmer with a compatible WarmlyYours timer
or switch. Make sure to refer to the installation manual of the control for proper
operation and installation. If you have any questions, call [phone].
Your WarmlyYours Towel Warmer is designed to gradually warm towels and works
best when towels are left to hang for at least 1 hour.
For optimum operation of your new towel warmer, we recommend placing no
more than two (2) towels at a time on the warmer. Place the towels in a way to
maximize the contact area between the towel and the towel warmer. The towel will
be its warmest when it is placed over the top bar. This allows a greater portion of
the towel to make the most contact with the warmer.
5. SPECIFICATIONS
Model Name Dimensions
Voltage
(Volts)
Heat Output
(Watts)
Resistance
(ohms)
Amperage
(amps)
TW-SUM08PS-HP
Summit-
Polished
19 5/8” W (498.5 mm)
35 1/2” H (902 mm)
10 3/4” D (273 mm)
120 120 120 1
TW-SUM08KS-HP
Summit-
Black
19 5/8” W (498.5 mm)
35 1/2” H (902 mm)
10 3/4” D (273 mm)
120 120 120 1
11 12